The following information will help you to setup and configure a Dial-up Networking Connection for use with CSolutions Dialup service.
How to set up your Macintosh OS X

From the Apple menu, choose System Preferences.



Click the Network icon.



Click the arrow box on the Show pop-up list and choose Internal Modem.

Click on the TCP/IP tab.

Click the arrow box on the Configure pop-up list and choose Using PPP.

In the Domain Name Servers box, type in 208.186.96.2 and 208.186.96.3.

In the Search Domains box, type in CSolutions.com

Click on the PPP tab.



In the Telephone Number field, type the local CSolutions.Com and use one of our access numbers for your area. (Click for Local Numbers)

In the Account Name field, type your username.

In the Password field, type your password.

Check the box next to Save password.

Click the PPP Options button.

Click Click Apply Now.



Check the box next to Connect automatically when starting TCP/IP applications.
Uncheck the box next to Prompt to stay connected.

Uncheck the box next to Disconnect if idle.

Check the box next to Disconnect when user logs out.

Click the OK button.



Click on the Proxies tab. Uncheck all the boxes. Click on the Modem tab and then Click Apply Now.



Click the arrow box on the Modem pop-up list and choose your modem.

Click the Tone radio button in the Dialing area.

Check the box next to Show modem status in menu bar.

Click the Apply Now button.

Close the Network window.

Click the Apply Now.



Check the Connection

1. If the connection is to be initiated and disconnected manually, the Internet Connect Application, available in the Applications folder on the hard drive, must be used.

Note: For convenient access to Internet Connect, provide an alias to the application on the Mac OS X dock. Find the Internet Connect application in the Applications folder. Click and hold on the Internet Connect icon, and drag to the light blue dock area at the bottom of the desktop. Release anywhere on the dock to the left of the white line. The new icon for Internet Connect, pictured as a yellow book with a telephone receiver, can be double-clicked at any time to launch the Internet Connect application. When the application is active, a black triangle will be shown under the application icon.

2. Launch the Internet Connect application from the dock or Applications folder.

3. Enter your password, and click Connect to make a dial-up connection.



4. When connection has been established in the bottom of the Internet Connect window, launch an Internet application, such as Internet Explorer, to check the connection.

5. To end the dial-up session click Disconnect.

You may also email us 24 hours a day at support@csolutions.net.